POA
SPLIT HOPPER BARGE. Built 1970 in Greece, 59m x 9.50m x 3.24m, GRT/NRT 571/548, hold capacity 650cbm. PROMPT INSPECTION & DELIVERY.
View
boat details
POA
SPLIT BARGE. Built 2010 in Greece, 30m x 6.50m x 2.18m registered depth, GRT 151, 5 void spaces to port and starboard, 89m2 hold capacity. Extend & retract forces 80tons/50 tons. The vessel is not self-propelled, but has one engine (88kw @ 2800rpm) to run the pump and to open & close the bow doors. CONTACT US FOR GUIDANCE ON PRICE.
View
boat details
CAD 6,850
1986 20' x 12' x 3' Steel Deck
Barge & 16' x 5.5' Steel Punt
Barge is 11 gauge steel with 3/16 steel on the rake
16' x 5.5' steel punt - 11 gauge - no engine
Used to take bldg materials to an island
Taken out of the water every fall
Located near Britt, Ontario
Available for pickup in the spring of 2012
Price: $6,850 CDN
View
boat details
USD 550,000
2000 87' x 38' x 2'10"(draft) Crane/Spud
Barge
Gross tonnage: 166 tons
Built in Westport, MA
Shell plate thickness: 3/8" to 1/2"
Headroom in engine room: 6'
Depth of barge: 6'
Deutz 100 hp air cooled diesel engine below deck (300 hrs) - for remote control for spuds and slewing winches
35' bow ramp - 100 ton capacity
20" square spuds
Many extra items come with the barge
Last survey: October, 2010
Additional information: Spud barge- Built in 2000 of mostly 3/8", 1/2" head log/ main lon
View
boat details
USD 1,390,000
2007 140' x 40' x 2'5" to 9'10"
850 cu. yd.
ABS Split Hull Dump Scow
ABS Load Line
Gross tonnage: 564 tons
Shell plating thickness: 1/2" to 4"
Remote control split hull dump scow
Headroom in engine room : 5'
Engine: John Deere 5030 - 99 hp = 60 hours
Used very little
Last survey: October, 2010
Located in Massachusetts
Additional Information: Built in 2007 of 1/2" hull, 5/8 hopper, very thick steel around hinge assembly's both above and bellow decks. ABS certified, Load line, 850 cubi
View
boat details
USD 262,500
1960 130'1" x 45' x 9.6' Steel Spud
Barge
Very heavily built
Gross tonnage: 521 tons
Not ABS certified
Built as a sectional barge (3) 15' x 30' & (6) 15' x 50' sections - bolted together
(2) 2" thick 24" x 24" x 45' spuds
At the present time a 200+ ton crane is being used on the barge
Deck has been plated extra heavy
Used in fresh water only
Located in Indiana on Lake Michigan
Price $262,500 USD
View
boat details
POA
BLT 1985, GREECE, LOA 39.0M, BEAM 18.6M, DEPTH 2.58M, CRANE TYPE LIMA, LIFTING CAPACITY 100T, LENGTH OF BOOM 30-42M, LOCATION MED
View
boat details
USD 42,000
2006 20' x 20' x 5' Sectional
Barge with Pile Driving Equipment Two 20' x 10' x 5' Steel Shugart sectional truckable barges Hydraulic crane capacity: 10,000lb @ 6 ft. out & 1200lb @ 28ft out 1200lb air hammer with an 8hp air compressor Pushed by a 1998 150hp Evinrude outboard Propeller: 12" dia x 13" pitch, aluminum, 3 blades Steering: Manual Cruising speed: 3 to 5 mph Gross tonnage: 17.5 tons Net tonnage: 15 tons Shell plate thickness of barge sections: ¼" Framing of barge sections: 3" x
View
boat details
USD 27,500
1988 24' x 12' x 4' Steel Self Propelled
Barge C/w 8 ton folding knuckleboom crane Raked bow Powered by deck mounted Harbor Master Unit with 3 cyl Deutz Diesel In very good condition Located near New York City Price $27,500 USD
Additional 1988 24? x 12? x 4? Steel Self Propelled
Barge C/w 8 ton folding knuckleboom crane Raked bow Powered by deck mounted Harbor Master Unit with 3 cyl Deutz Diesel In very good condition Located near New York City Price $27,500 USD
View
boat details
POA
2010 New Build 30' x 12' x 3'
Steel Pontoon Barges (2) or (3) 4' x 3' square pontoons – 3/16" plate 3/16" deck plate deck Raked on both ends Built to suit customers' needs These barges can be built with 2 or 3 square pontoons Can be built with ramps, engine brackets, cranes and etc Built in Ontario, Canada Prices on request
Additional 2010 New Build 30? x 12? x 3?
Steel Pontoon Barges (2) or (3) 4? x 3? square pontoons ? 3/16? plate 3/16? deck plate deck Raked on both ends Built to s
View
boat details
POA
30' x 10' x 2.5' New Steel
Barge These barges are built in Buffalo, NY Constructed of 3/16" plate Price on request
View
boat details
POA
30' x 12' x 4' Aluminum
Barges – new construction Constructed of ¼" marine grade aluminum 5 separate pressure tested compartments Built in Oregon, USA
Barges are rugged and well built to last a long time at an affordable price. These barges are constructed of marine grade aluminum and custom built to your specifications. Prices on request.
View
boat details
USD 21,000
1997 32' x 16' x 4'
Steel Sectional Materials Barge Constructed of ¼" steel Each section has one bulkhead One section has new deck – 2006 Located near South Haven, Michigan Price $21,000 USD
Additional 1997 32? x 16? x 4?
Steel Sectional Materials Barge Constructed of ¼? steel Each section has one bulkhead One section has new deck ? 2006 Located near South Haven, Michigan Price $21,000 USD
View
boat details
POA
2011 33' x 10'3" Steel Landing Craft/
Barge All weights and measurements are approximate Front door: 6' wide Capacity: 10,000 lbs Weight: 6,500 lbs plus power Checker plate sole Bottom/stern: 10 gauge Sides/gunwales: 12 gauge Bottom sandblasted and epoxy painted/hull primed Power option – outboard or inboard/outboard Located in Southern Ontario Price on request for completed landing craft.CDN Owner has a used stern drive Mercury 190 hp GMC engine, 196 hours since new with power steering /pa
View
boat details
USD 94,500
1990 34' x 20' x 3' Sectional Steel Work
Barge with Excavator Work barge is made up of 3 sections – (2) 34' x 8' x 3' (1) 34' x 4' x 3' Center section was built in 2006 Thickness: ¼" Bulkeads: Four in each section Spuds: 10" x 27' x ½" wall Excavator: 130 Hyundai frame Deutz diesel engine – 6 cyl, approx 130 hp Pilot control New pump New valve body Located near South Haven, Michigan Price $94,500 USD
Additional 1990 34? x 20? x 3? Sectional Steel Work
Barge with E
View
boat details
POA
“New" 36' x 12' x 38" Steel
Barges 3 compartments Constructed of 3/16" steel Two 6" spudwells Raked transom Built in Ontario, Canada Price on request
View
boat details
USD 31,000
(12) 40' x 10' x 5' used
Steel Sectional Barges Built in 2004, 2005 & 2006 Not raked Located in Ohio Available as of June 25, 2008 Price $31,000 USD each
Additional (12) 40? x 10? x 5? used
Steel Sectional Barges Built in 2004, 2005 & 2006 Not raked Located in Ohio Available as of June 25, 2008 Price $31,000 USD each
View
boat details
USD 39,990
New Build - 40' x 13' x 4'
Steel Deck Barge Will be constructed with 1/4" steel plate With compartments Builder located on south shore of Lake Erie
Additional New Build - 40' x 13' x 4'
Steel Deck Barge Will be constructed with 1/4" steel plate With compartments Builder located on south shore of Lake Erie
View
boat details
USD 29,999
(2) 2000 40' x 12' x 7' Shugart Type Sectional
Barges (9) 2000 40' x 10' x 7' Shugart Type Sectional
Barges
Barges were built in Louisiana in year 2000 Constructed of ¼" steel plate
Barges join together with pins (pins are 15" apart) Located near Chicago, Illinois Price $29,999 USD each
Additional (2) 2000 40? x 12? x 7? Shugart Type Sectional
Barges (9) 2000 40? x 10? x 7? Shugart Type Sectional
Barges
Barges were built in Louisiana in year 2000 Constructed of ¼? steel plate
Barges
View
boat details
CAD 35,000
(3) Aluminum 40' x 8' x 3'
Barges Built in the 1980's Raked on one end In very good condition Can be sold as is or fitted with optional outboard brackets and helm i.e. centre console, or open or fully enclosed wheelhouse. Located in Ontario, Canada Price reduced from $50,400 CDN each to $35,000 CDN (as is, where is) Scruton Marine Services - File No. B2214
View
boat details
